Some basic steps for using a 3-axis cylinder head water plug tightening machine
* : * : admin * : 2023/06/26 16:20:39 * : 16
The following are some basic steps for using a 3-axis cylinder head water plug tightening machine:
Preparation of parts: Place the water plugs and cylinder heads that need to be tightened on the workbench and ensure that their surfaces are clean and dust-free.
Install water plug: Place the water plug on the tightening machine and fix it in the correct position using a fixture.
Calibration parts: Use calibration tools to calibrate the cylinder head and water plug to ensure they are in the correct position.
Set tightening parameters: Set appropriate tightening parameters, such as tightening torque, tightening speed, etc., based on customer needs and cylinder head material.
Start tightening: After all parameter settings are completed, start the tightening machine and start the tightening process.
Check tightening results: After tightening, use an inspection tool to check the tightening results of the water plug to ensure it has been fully tightened.
Cleaning: Clean the workbench and tightening machine to ensure they are clean and dust-free for future use.
These steps are the basic steps for using a 3-axis cylinder head water plug tightening machine, and the specific steps may vary depending on the requirements of the equipment manufacturer and customer.
previous item: When using the 4-axis differential assembly bolt tightening machine, the following steps need to be carried out next item: Dismantling and tightening machine for end caps of single axle motor cars and high-speed railway shock absorbers