Tightening machine - problems encountered during operation
* : * : admin * : 2022/04/13 9:43:37 * : 0
Production and assembly manufacturers generally pay attention to cost, but it is obvious from the comparison of labor cost and production automation cost that automation is not to increase the cost. On the contrary, automation is an effective guarantee to reduce the cost. Automation can avoid the production deviation caused by labor cost and a series of costs caused by deviation, make the products produced indistinguishable, which is conducive to large-scale and mass production, and automation can provide users with stable products. Manual operation cannot avoid human errors and deviations. Labor cost is not a single cost problem. For large-scale mass production, labor cannot guarantee the reliability, stability and quality of production. At this time, automation is more important. Automatic production of equipment is not only the guarantee of reliable and predictable benefits, but also an important technical solution to ensure high quality, which can not be replaced by manual operation. Automation also brings another advantage: it can quickly install and debug equipment, enable customers to put into normal production and operation as soon as possible, save time and space for customers, and ensure that customers can quickly put into reliable production without deviation. Standardized and unbiased production lines always appeal to automation, and what we have to do is always this trend and go ahead.
Servo tightening machine - equipment used for high torque precise torque control tightening. There are a series of problems during assembly, such as:
The tightening bolt of the hub is broken and the tightening torque is too large to be controlled accurately. If the pressing force is too small, the bolt may loose due to vibration or cyclic load. If the pressing force is too large, it is easy to cause fracture and deformation of connecting components.