What is the safe operation mode of tightening machine?
* : * : admin * : 2019/11/29 13:19:06 * : 45
The tightening machine is widely used in the production and assembly lines of major automobiles, and its working principle is also very complex. We only need to know about it in the early stage, but in the actual operation process, we must master the operation rules, especially in the safety aspect. Today, Shanghai xuansang electromechanical will recommend the safe operation rules of the tightening machine to you in detail.
1. Before operating the tightening machine, the staff must take part in professional training to master the structural characteristics, performance, use method and operation process of the equipment. They should also be familiar with the ordinary maintenance and repair. Only after passing the assessment can they formally operate the tightening machine.
2. When operating the tightening machine, wear labor protection articles and take good care of your own safety according to the specified requirements.
3. For the setting of various parameters of the human-machine interface of the tightening machine and the selection of the efficiency, it is not allowed to change and adjust at will. In addition, for the pressure adjustment value of the air pressure element, it is not allowed to change at will, which is very dangerous. When necessary, it is necessary to let professional personnel operate.
4. Before the formal use of the tightening machine, first check the horizontal position of the lower cantilever crane and the column to see if there is any abnormal situation of looseness or inclination, then check whether the pressure of the lower air circuit is normal, and whether the bearing bolts are loose, etc. if the pressure is found not within the normal range, or there is air leakage, then deal with it immediately, after everything is normal , can be turned on.
5. When operating the tightening machine, it is necessary to be familiar with the safety operation procedures and do a good job of protection. In the process of tightening the machine, the staff shall not enter the inside of the equipment. After the work is completed, the machine shall be shut down according to the requirements of the procedure, and finally the air source and power supply shall be shut down. If all abnormal conditions are found, the machine will be shut down soon, and the tightening machine shall not be allowed to have faults Barrier work.
previous item: The selection method of automatic screwing machine next item: Influence of servo press on stamping process